- home
- about
- founder & publisher
- editorial boards
- advisory board
- for authors
- call for papers
- archive
- online first
- editorial policy
- participation fee
- contacts
THERMAL SCIENCE
International Scientific Journal
Thermal Science - Online First
Online First contains the manscripts of articles that have been accepted for publication but have not yet appeared in the paper journal. They have been peer reviewed and edited to the journal's usual standards. Online First articles should be cited by their digital object identifiers (DOIs) which are given for every article. Manuscripts of the papers can be changed after technical and language corrections in the process of preparing computer layout for hard copy priniting.
Papers Accepted in 2025
Influence of volumetric radiation properties on natural convection in the low mach number approximation
Experimental study on ignition characteristic and performance of a two-stroke engine fueled with aviation kerosene
Influence of feed flow rate and feed concentration on the ammonia absorption refrigeration system
Evaluating the efficacy of external shading devices on building energy consumption: A case study in hot climate
Study on measurement and prediction methods of nonlinear thermal conductivity of high-temperature resistant porous insulation
Effect of process parameters on residual stress and thermal deformation in vacuum brazing of Inconel 617 plate core structures
Numerical analysis of wake thermal flow field for SW300 pro aero-engine
Thermal performance optimization study of two types of side cooling plates for 280Ah battery modules
A novel grain configuration for dual thrust solid rocket motor using two propellants
Energy and exergy analysis of a hybrid ORC power plant
Improving the efficiency of automatic rocket stations using tetra
Remaining working reliability of vertical fired heater with simultaneously used RBI matrix
Numerical investigation on heat transfer enhancement of graphene coated circular pin fin
Dynamic radiative cooling: A review of materials for energy-efficient window applications
Numerical modeling of an earth air heat exchanger under the local conditions of Laghouat City, Algeria
Evaluation of refrigerant oil separators for screw chiller
Development and validation of a cryogenic hydrogen vapor dispersion model with integrated risk assessment framework for accident scenarios in hydrogen refueling infrastructure
Numerical study of fin effects on thermal performance of annular solar salt-layered vacuum collector tubes
Assessment of low-energy potential of a school building using operation optimization and surrogate models
Experimental investigation on the influence of casing relative motion on heat transfer characteristics of the squealer tip
Modelling of oil flow components between the tank and active part of non-OD liquid-immersed power transformers
Influence of porous media parameters on isothermal piston compression system
Combustion characteristics of methanol with turbulent jet ignition in a constant volume combustion chamber
Combustion and emission characterization of natural gas doped ammonia burner
Application of deep learning for acoustic impedance analysis and performance prediction in a free-piston stirling engine
Numerical study on combustion and emission of NH3/CH4 mixtures under gas turbine conditions: Effects of pressure and hydrogen
Analysis of the effect of piezoelectric sensor ageing on indicated parameters
Topology optimization study on flow and heat transfer performance of turbine pin-fin cooling structure
Improving automotive air conditioning systems' (AACs) thermodynamic performance with eco-friendly azeotropic refrigerant blends
Study on the explosion suppression performance of methane-air mixtures based on NH4H2PO4-modified dry water gel
Indoor-outdoor concentration of particulate matter in a lead-zinc mine: A case study from China
Experimental study on portable cold storage box with phase change material packages
Thermal characteristics of natural ester transformers under extreme ambient temperatures
Experimental and numerical study of flame characteristics of H2/landfill gas laminar premixed combustion
Real working process of a supercharged direct-injection spark-ignition engine with multiple injection: Method for calculating the effective mixture composition in the angular domain
Research on the mechanism of energy attenuation and compensation during the service-life of oxygen lance nozzles
Numerical investigation of heat transfer performance in parallel and symmetric wavy microchannel heat sinks
Research on the thermohydraulic performance of parallel evaporative cooling system for insulated gate bipolar transistor
Experimental study on ultrasonic wave propagation and attenuation characteristics in heat exchangers
Development of a reduced combustion mechanism for 2-butyltetrahydrofuran and its blends with diesel
Cycle analysis of a single-stage transcritical R744 system in supermarkets: The impact of isentropic efficiency and oil
Numerical investigation of interaction between internal mixing air and spray of three kinds of fluids
Thermal comfort in typical seasons of summer and winter in personnel intensive areas of underground public buildings of Xi'an in China
Study on multiple mechanisms and contribution weights of slagging in biomass-fired boiler
Numerical study of flow boiling in inclined large length-diameter microchannels
Determination of thermal conductivity coefficient of a biocomposite based on wood sawdust
Parametric investigation on the measurement accuracy of differential pressure system for nuclear power plant steam generator
Suppression effects of typical inert gases on the explosion characteristics of gasoline mist in closed vessel
Earth-sheltered building with trombe wall and pergolas as a future bioclimatic and passive solar energy-efficient building strategy
Research on heating and defrosting performance of air source heat pump system based on composite phase change materials
Combustion characteristics of dual swirl low nitrogen burners in small gas boilers
Thermal comfort analysis in an educational building in a hot climate area using CFD
Integrated modeling and optimization of various cogeneration systems for a zero-energy industrial building using the combination of renewable energies
LCA of a short-flight belt conveyor
Assessing the potential of chemiluminescence to characterize no formation in ammonia-methane premixed flat flames
Performance of static drilled root energy piles under seasonal thermal loading: A study of monotonic heating in summer
Optimized design of complex microchannel heat sink structure with triangular cavity m-type pins
Enhanced performance of photovoltaic modules via experimental evaluation of novel heat sink designs
Simulation on natural convection of Carreau fluids in a locally heated trapezoidal cavity
Forecasting indoor nitrogen-dioxide concentrations in a student dormitory using RNN-LSTM models
Thermal applications of carbon nanotubes (SWCNTs-MWCNTs) due to accelerating plate with ramped temperature conditions: Advanced fractional simulations
Optimization of air source heat pump system based on TRNSYS and artificial neural network
Measurement of small flow rates through radial clearances
Increasing the energy efficiency of manufacturing industrial systems using criticality assessment methods
Energy and exergy analysis of a renewable energy-driven ejector-compressor cycle with optimal refrigerant selection
q-Elzaki transform and its properties
Simulation and theoretical study of temperature field and thermal displacement distribution of rock-breaking disc cutter ring based on heat conduction theory
An introduction to q-Henstock-Kurzweil integral and applications
Numerical study of the conjugate mixed convection in inclined finned annulus
Cities in energy transition: Local responses to national challenges
Research on the method of calculating heat transfer and thermal-mechanical coupling responses in multi-layer structures using shell elements
Effect of surface emissivity on the radiative efficiency of divergent porous burner
Numerical analysis of flow and heat transfer characteristics in porous wick of heat pipe
Evaluation of energy consumption on a public transport line operated by buses with different powertrains: A case study from Belgrade
Evaluation of forced convection assisted medium wave infrared drying on some quality properties of banana and zucchini slices
Various ensemble methodologies for building cooling energy use prediction
Machine learning based prediction model and interpretable analysis of airflow temperature in water dropping shaft
Molecular dynamics simulation of water vapor condensation on nanostructured surfaces
Study on temperature measurement and experiment of loose coal based on acoustic thermometry
Optimization of cooling structure and analysis of flow thermal performance for high-speed permanent magnet motor in hydrogen fuel cell air compressors
Numerical simulation of enhanced heat transfer in heat storage units by metal foam and fins
Mechanisms of thermal motion in n-octadecane by copper and copper oxide nanoparticles: Insights from equilibrium molecular dynamics simulations
Experimental study of a Peltier cooler coupled to a thermosiphon heat sink
Theoretical analysis for flow condensation heat and mass transfer of zeotropic mixtures in a horizontal smooth tube
An experimental and numerical investigation to enhance heat transfer in porous heat exchangers for waste heat recovery system
Numerical analysis of heat and mass transfer in heat pipe using a triple-phase coupled model
A critical parametric investigation of a solar dish concentrator integrated with a stirling power engine
Hydrodynamic performance study of a vertical-axis bio-inspired tidal current turbine
Numerical simulation of combustion characteristics and NOx emission in a 330 MW power plant boiler with self-sustaining internal combustion burner
Simulated thermal response of a battery pack used by electric two-wheelers
Study on thermal-flow field characteristics in multi-angle deicing jet using phase-field and k-ω turbulence models
Effect of utilizing roughed surfaces within a curved microchannel having cavities on the thermo-hydraulic performance
Correlation development and parametric investigation for local pressure drop of mixing t-junction using response surface methodology
Identification of a steam superheater in a drum-type steam boiler with fluidized bed combustion
Characteristics of thermocapillary convection in liquid bridge with dynamic interface under zero gravity
Optimization design of a marine gas heater with dimpled plate heat exchanger based on response surface methodology
Numerical investigation of instability patterns in Taylor-Couette flow under various configurations
Hybrid combined cycle power plant with biomass gasification: Thermodynamic analysis
Optimization of thermal resistance for high-temperature molten salt pump based on response surface methodology and NSGA-II algorithm
Improvement of air temperature and flow fields in flat steel cooling beds based on CFD simulations
Experimental investigation of heat transfer of plate surface with novel eye shaped dimples
Research on battery thermal management system based on imitation tesla valve liquid cooling plate
Chikungunya virus 2004-2025: Mechanistic biothermodynamic model of Chikungunya virus antigen-receptor binding and multiplication driven by gibbs energy
Molecular dynamics simulation of vapor-liquid equilibrium for binary mixtures of HFO-1234yf and HFC-41
Pollutants distribution on platforms and station halls at different times during the operation cycle of subways： A case study of Xi'an, China
Influence of gasification reactor temperature on the performance of plastic waste pyrolysis
Experimental study on charge optimization of R32/R1270 and its alternative performance in the quasi-two-stage compression heat pump for district heating
Numerical simulation study on the influence of secondary channels on heat dissipation performance of corrugated microchannels
Development of a natural gas hot blast furnace based on CFD simulation
Evaluating the impact of reservoir properties on in-situ combustion stability in extra-super heavy oil using temperature peaks and characteristic parameters
Numerical study on the flow field and particulate deposition in the asymmetric channels of a wall-flow diesel particulate filter
Effect of blockage mode on hydrogen deflagration to detonation transition in a long and narrow space
Experimental study on evaporation of defrosting residual droplet on fin surface and enhancement by electric field
Influence of the joint geometry on heat energy, generated during the plunge stage of friction stir welding
Influence of air distributors on heat transfer and hydrodynamic performance in fluidized bed heat exchangers
Effect of nanoparticles on the flow and heat transfer characteristics of scCO2
Statistical moment characterization of Rayleigh-Bénard convection using optical tweezer-trapped microsphere probes
Papers Accepted in 2024
Thermodynamics and nanotechnology for 5G communication technology and energy harvesting
Effects of diesel injection timing and methanol substitution ratio on combustion and exhaust emission characteristics of a dual fuel compression ignition engine
Influence of multiple factors on calcined coal kaolin and numerical simulation of rotary kiln
Study on the typical influencing factors of gasoline vapor explosion in a confined space
Improving thermal performance and energy production of photo-voltaic thermal collector by bifurcating tree-like cooling channels
Study on finite element method coupled with genetic algorithm in optimization for temperature uniformity of hot plate welding