Thermal Science

An experimental and numerical investigation to enhance heat transfer in porous heat exchangers for waste heat recovery system

Parametric investigation on the measurement accuracy of differential pressure system for nuclear power plant steam generator

Numerical modeling of an earth air heat exchanger under the local conditions of Laghouat City, Algeria

Numerical investigation and analysis on thermal-hydraulic characteristics of dimple plate heat exchanger

THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Thermal and mechanical analysis of wheel rim in Formula 1 vehicles

THERMAL SCIENCE, volume 29, No. 1, YEAR 2025

Investigation of heat transfer and pressure drop in flexible metal hoses with corrugated surfaces

THERMAL SCIENCE, volume 28, No. 6, YEAR 2024

Numerical simulation for optimising of inlet and outlet positions for mechanical ventilation and heat dissipation: A case study to improve ventilation in an indoor 110kV substation

THERMAL SCIENCE, volume 28, No. 6, YEAR 2024

Computational modelling in a high rise building with different building envelope materials for sustainable living

THERMAL SCIENCE, volume 27, No. 6, YEAR 2023

A numerical study for coating of ventilation ducts using jet injection

THERMAL SCIENCE, volume 27, No. 5, YEAR 2023

Case study on thermal optimization of oil immersed transformer used in solar power plant based on genetic algorithm and computational fluid dynamics

THERMAL SCIENCE, volume 27, No. 5, YEAR 2023

A new approach to predict fouling using a transient CFD model and dynamic mesh

THERMAL SCIENCE, volume 26, No. 6, YEAR 2022

Heat transfer enhancement using non-equally structure in a plate-fin heat exchanger with offset fins

THERMAL SCIENCE, volume 26, No. 6, YEAR 2022

Effect of shell on performance of heat exchanger with trefoil-hole baffle

THERMAL SCIENCE, volume 26, No. 6, YEAR 2022

Numerical analysis and optimization of thermal performance of lithium battery pack based on air-cooling strategy

THERMAL SCIENCE, volume 26, No. 5, YEAR 2022

The misfire degree and its effects on combustion and pollutant formation of subsequent cycles: A study on a high speed gasoline engine

THERMAL SCIENCE, volume 26, No. 2, YEAR 2022

Design and verification of ultra-high temperature lithium heat pipe based experimental facility

THERMAL SCIENCE, volume 26, No. 4, YEAR 2022

Numerical analysis of thermal performance of heat exchanger: Different plate structures and fluids

THERMAL SCIENCE, volume 26, No. 2, YEAR 2022

Numerical simulation on temperature in wood crib fires

THERMAL SCIENCE, volume 25, No. 4, YEAR 2021

Study on the influence of underwear on local thermal and moisture comfort of human body

THERMAL SCIENCE, volume 25, No. 4, YEAR 2021

Investigations on melting and solidification of a battery cooling system using different phase change materials

THERMAL SCIENCE, volume 25, No. 4, YEAR 2021

Computational fluid dynamics analysis on solar water heater: Role of thermal stratification and mixing on dynamic mode of operation

THERMAL SCIENCE, volume 24, No. 2, YEAR 2020

Investigation of air conditioning temperature variation by modifying the structure of passenger car using computational fluid dynamics

THERMAL SCIENCE, volume 24, No. 1, YEAR 2020

Numerical investigation of vapor phase drzing process for drying of transformer’s insulation paper

THERMAL SCIENCE, volume 24, No. 3, YEAR 2020

A coupled flow and chemical reactor network model for predicting gas turbine combustor performance

THERMAL SCIENCE, volume 24, No. 3, YEAR 2020

Analysis of thermal flow in waterwall tubes of the combustion chamber depending on the fluid parameters

THERMAL SCIENCE, volume 23, Supplement 4, YEAR 2019

Computational fluid dynamics simulation of the supersonic steam ejector using different condensation model

THERMAL SCIENCE, volume 23, No. 3, YEAR 2019

Numerical investigation of heat transfer at a rectangular channel with combined effect of nanofluids and swirling jets in a vehicle radiator

THERMAL SCIENCE, volume 23, No. 6, YEAR 2019

Nozzle flow gas-dynamical properties under dome deflector thrust vector system effect

THERMAL SCIENCE, volume 23, No. 2, YEAR 2019

Experimental and numerical analysis of thermo-chemical erosion in gun steel

THERMAL SCIENCE, volume 23, No. 2, YEAR 2019

Computational fluid dynamic simulation of swirl flow in hexagonal rod bundle geometry by split mixing vane grid spacers

THERMAL SCIENCE, volume 23, No. 5, YEAR 2019

Numerical investigation of the transient spray cooling process for quenching applications

THERMAL SCIENCE, volume 22, No. 5, YEAR 2018

Effect of combined hole configuration on film cooling with and without mist injection

THERMAL SCIENCE, volume 22, No. 5, YEAR 2018

Simulation on marine currents at Midia Cape-Constanta area using computational fluid dynamics method

THERMAL SCIENCE, volume 22, Supplement 2, YEAR 2018

Optimization of micro pin-fin heat sink with staggered arrangement

THERMAL SCIENCE, volume 22, No. 6, YEAR 2018

Numerical study on heat transfer characteristics of nanofluid based natural circulation loop

THERMAL SCIENCE, volume 22, No. 2, YEAR 2018

Computational fluid dynamics analysis for improving temperature distribution in a chili dryer

THERMAL SCIENCE, volume 22, No. 6, YEAR 2018

The school of the turbulent swirling flow at the Faculty of Mechanical Engineering University of Belgrade

THERMAL SCIENCE, volume 21, Supplement 3, YEAR 2017

Fractal aggregation and breakup of fine particles

THERMAL SCIENCE, volume 20, No. 3, YEAR 2016

Experimental and simulation testing of thermal loading in the jet tabs of a thrust vector control system

THERMAL SCIENCE, volume 20, Supplement, YEAR 2016

Numerical prediction of nucleate pool boiling heat transfer coefficient under high heat fluxes

THERMAL SCIENCE, volume 20, Supplement, YEAR 2016

Numerical analysis of mixed convection in pulsating flow for a horizontal channel with a cavity heated from below

THERMAL SCIENCE, volume 20, No. 1, YEAR 2016

Scandinavian baffle boiler design revisited

THERMAL SCIENCE, volume 19, No. 1, YEAR 2015

Experimental and numerical investigation of a louvered fin and elliptical tube compact heat exchanger

THERMAL SCIENCE, volume 19, No. 2, YEAR 2015

Investigation on effect of equivalence ratio and engine speed on homogeneous charge compression ignition combustion using chemistry based CFD code

THERMAL SCIENCE, volume 18, No. 1, YEAR 2014

An approach to the modeling of a virtual thermal manikin

THERMAL SCIENCE, volume 18, No. 4, YEAR 2014

Computational fluid dynamics analysis of the influence of injection nozzle lateral outflow on the performance of Ranque-Hilsch vortex tube

THERMAL SCIENCE, volume 18, No. 4, YEAR 2014

Computational fluid dynamics analysis on heat transfer and friction factor characteristics of a turbulent flow for internally grooved tubes

THERMAL SCIENCE, volume 17, No. 4, YEAR 2013

Numerical study on the combustion process of a biogas spark-ignition engine

THERMAL SCIENCE, volume 17, No. 1, YEAR 2013

Three dimensional numerical analysis of temperature distribution in an automobile cabin

THERMAL SCIENCE, volume 16, No. 1, YEAR 2012

Computational fluid dynamics calculations of waste-to-energy plant combustion characteristics

THERMAL SCIENCE, volume 15, No. 1, YEAR 2011

Numerical investigation of the effect of fuel injection mode on spray/wall interaction and emission formation in a direct injection diesel engine at full load state

THERMAL SCIENCE, volume 14, No. 4, YEAR 2010

Numerical simulation of the influence of stationary louver and coal particle size on distribution of pulverized coal to the feed ducts of a power plant burner

THERMAL SCIENCE, volume 13, No. 4, YEAR 2009

Optimal temperatures and maximum power output of a complex system with linear phenomenological heat transfer law

THERMAL SCIENCE, volume 13, No. 4, YEAR 2009

Numerical study of hydrogen mild combustion

THERMAL SCIENCE, volume 13, No. 3, YEAR 2009

A lattice Boltzmann coupled to finite volumes method for solving phase change problems

THERMAL SCIENCE, volume 13, No. 2, YEAR 2009

Computational study of smoke flow control in garage fires and optimization of the ventilation system

THERMAL SCIENCE, volume 13, No. 1, YEAR 2009

A computational fluid dynamics analysis on stratified scavenging system of medium capacity two-stroke internal combustion engines

THERMAL SCIENCE, volume 12, No. 1, YEAR 2008

3-D CFD analysis on effect of hub-to-tip ratio on performance of impulse turbine for wave energy conversion

THERMAL SCIENCE, volume 11, No. 4, YEAR 2007

An environmental LCA of alternative scenarios of urban sewage sludge treatment and disposal

THERMAL SCIENCE, volume 11, No. 3, YEAR 2007

Numerical simulation of fire spread in terminal 2 of Belgrade airport

THERMAL SCIENCE, volume 11, No. 2, YEAR 2007

Comparison of calculation methods for smoke and heat evacuation for enclosure fires in large compartments

THERMAL SCIENCE, volume 11, No. 2, YEAR 2007

Oxidation stability and risk evaluation of biodiesel

THERMAL SCIENCE, volume 11, No. 2, YEAR 2007

Simulations of the kettle reboiler shell side thermal-hydraulics with different two-phase flow models

THERMAL SCIENCE, volume 10, No. 2, YEAR 2006

Micro channels in macro thermal management solutions

THERMAL SCIENCE, volume 10, No. 1, YEAR 2006

Implementation of discrete transfer radiation method into swift computational fluid dynamics code

THERMAL SCIENCE, volume 8, No. 1, YEAR 2004

Thermal Science Journal [keyword: computational fluid dynamics]