THERMAL SCIENCE

International Scientific Journal

Thermal Science Journal [Omolayo M Ikumapayi]

Omolayo M Ikumapayi
All years
2025 2023

Omolayo M Ikumapayi1

,

Noureddine Kaid2

,

Samia Larguech3

,

Younes Menni2,4

,

Mustafa Bayram5

,

Abiodun Bayode1

,

Tin Tin Ting6,7

,

Ali Akgül5,8,9,10,11

,

Salih Özer12

1 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
2 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama (Ctr. Univ. Naama), Naama, Algeria
3 Department of Electrical Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia
4 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
5 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
6 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
7 School of Information Technology, UNITAR International University, Selangor, Malaysia
8 Department of Electronics and Communication Engineering, Saveetha School of Engineering, SIMATS, Chennai, Tamilnadu, India
9 Department of Mathematics, Art and Science Faculty, Siirt University, Siirt, Türkiye
10 Mathematics Research Center, Department of Mathematics, Near East University, Mersin, Türkiye
11 Applied Science Research Center, Applied Science Private University, Amman, Jordan
12 Mechanical Engineering, Mus Alparslan University, Mus, Türkiye
Optimizing heat transfer in laminar channel flow using inclined inverted L-shaped obstacles
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Omolayo M Ikumapayi1

,

Mohammed Douha2

,

Samia Larguech3

,

Noureddine Kaid4

,

Younes Menni4,5

,

Mustafa Bayram6

,

Abiodun Bayode1

,

Tin Tin Ting7,8

,

Erdinç Vural9

,

Salih Özer10

1 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
2 Higher Normal School of Bechar, Bechar, Algeria
3 Department of Electrical Engineering, College of Engineering, Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia
4 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama (Ctr. Univ. Naama), Naama, Algeria
5 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
6 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
7 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
8 School of Information Technology, UNITAR International University, Selangor, Malaysia
9 Germencik Yamanturk Vocational School, Aydin Adnan Menderes University, Aydin, Türkiye
10 Mechanical Engineering, Mus Alparslan University, Mus, Türkiye
Mixing enhancement in laminar flow using inclined inverted L-shaped vortex generators
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Omolayo M Ikumapayi1

,

Noureddine Kaid2

,

Samia Larguech3

,

Younes Menni2,4

,

Mustafa Bayram5

,

Abiodun Bayode1

,

Tin Tin Ting6,7

,

Salih Özer8

,

Erdinç Vural9

1 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
2 Institute of Technology, Department of Mechanical Engineering, University Center Salhi Ahmed Naama (Ctr. Univ. Naama), Naama, Algeria
3 College of Engineering, Princess Nourah bint Abdulrahman University, Riyadh, Saudi Arabia
4 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
5 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
6 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
7 School of Information Technology, UNITAR International University, Selangor, Selangor, Malaysia
8 Mechanical Engineering, Mus Alparslan University, Mus, Türkiye
9 Germencik Yamanturk Vocational School, Aydin Adnan Menderes University, Aydin, Türkiye
Analysis of velocity fields and heat transfer coefficients over inclined inverted L-shaped baffles in a 3-D channel
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Khayra Miloudi1

,

Imane Aliouane1

,

Younes Menni1,2

,

Mustafa Bayram3

,

Omolayo M Ikumapayi4

,

Abiodun Bayode4

,

Tin Tin Ting5,6

,

Salih Özer7

1 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama (Ctr. Univ. Naama), Naama, Algeria
2 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
3 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
4 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
5 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
6 School of Information Technology, UNITAR International University, Selangor, Malaysia
7 Mechanical Engineering, Mus Alparslan University, Mus, Türkiye
Fin twisting as a passive enhancement technique for high efficiency heat sink design
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Sarra Toumi1

,

Imane Aliouane1

,

Younes Menni1,2

,

Mustafa Bayram3

,

Omolayo M Ikumapayi4

,

Abiodun Bayode4

,

Tin Tin Ting5,6

,

Salih Özer7

1 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama, Naama, Algeria
2 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
3 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
4 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
5 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
6 School of Information Technology, UNITAR International University, Selangor, Malaysia
7 Mechanical Engineering Department, Mus Alparslan University, Mus, Türkiye
High performance electronic cooling using nanofluid-augmented heat sinks
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Hadjer Baghni1

,

Imane Aliouane1

,

Younes Menni1,2

,

Mustafa Bayram3

,

Omolayo M Ikumapayi4

,

Abiodun Bayode4

,

Tin Tin Ting5,6

1 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama (Ctr. Univ. Naama), Naama, Algeria
2 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
3 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
4 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
5 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
6 School of Information Technology, UNITAR International University, Selangor, Malaysia
The 3-D analysis of cu-water nanofluid influence on thermal and hydraulic performance in a 30° baffled counterflow heat exchanger
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Habib Bouighi1

,

Hamza Bousbaa1

,

Younes Menni2,3

,

Mustafa Bayram4

,

Omolayo M Ikumapayi5

,

Abiodun Bayode5

,

Tin Tin Ting6,7

1 Laboratory of Environmental Technology Research, Department of Mechanical Engineering, Faculty of Sciences and Technology, ENP MA-Oran, Oran, Algeria
2 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama, Naama, Algeria
3 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
4 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
5 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
6 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
7 School of Information Technology, UNITAR International University, Selangor, Malaysia
Comparative numerical analysis of diesel and biodiesel combustion in an internal combustion engine
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Basma Bakir1

,

Imane Aliouane1

,

Younes Menni1,2

,

Mustafa Bayram3

,

Omolayo M Ikumapayi4

,

Abiodun Bayode4

,

Tin Tin Ting5,6

1 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama, Naama, Algeria
2 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
3 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
4 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
5 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
6 School of Information Technology, UNITAR International University, Selangor, Malaysia
The 3-D investigation of baffle rotation effects on heat transfer performance in counterflow heat exchangers
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Ahmed Reteri1

,

Abdel Illah Nabil Korti1

,

Younes Menni2,3

,

Mustafa Bayram4

,

Omolayo M Ikumapayi5

,

Abiodun Bayode5

,

Tin Tin Ting6,7

,

Salih Özer8

1 ETAP Laboratory, Department of Mechanics, University of Tlemcen, Tlemcen, Algeria
2 Department of Mechanical Engineering, Institute of Technology, University Center Salhi Ahmed Naama, Naama, Algeria
3 College of Technical Engineering, National University of Science and Technology, Dhi Qar, Iraq
4 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
5 Department of Mechanical Engineering, Northwest University, Potchefstroom, South Africa
6 Faculty of Data Science and Information Technology, INTI International University, Nilai, Malaysia
7 School of Information Technology, UNITAR International University, Selangor, Malaysia
8 Mechanical Engineering Department, Mus Alparslan University, Mus, Türkiye
The 3-D performance improvement of photovoltaic systems with PCM and fin-based cooling
THERMAL SCIENCE, volume 29, No. 4, YEAR 2025

Cheikh Kezrane1

,

Houcine S Habib2

,

Mustafa Bayram3

,

Sultan Alqahtani4

,

Sultan Alshehery4

,

Omolayo M Ikumapayi5,6

,

Esther T Akinlabi7

,

Stephen A Akinlabi7

,

Khaled Loubar8

,

Younes Menni9,10

1 LDMM Laboratory, University of Djelfa, Djelfa, Algeria
2 Department of Mechanical Engineering, University of M'hamed Bougara, Boumerdes, Algeria
3 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
4 Mechanical Engineering Department, College of Engineering, King Khalid University, Abha, Saudi Arabia
5 Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado Ekiti, Nigeria
6 Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
7 Department of Mechanical and Construction Engineering, Faculty of Engineering and Environment, Northumbria University, Newcastle, UK
8 GEPEA, UMR 6144, DSEE, IMT Nantes, Nantes, France
9 Department of Technology, University Center Salhi Ahmed Naama (Ctr. Univ. Naama), Naama, Algeria
10 National University of Science and Technology, Nasiriyah, Iraq
Artificial neural network based prediction of engine-out responses from a biodiesel fuelled compression ignition engine
THERMAL SCIENCE, volume 27, No. 4, YEAR 2023

Sultan Alqahtani1

,

Sultan Alshehery1

,

Mustafa Bayram2

,

Omolayo M Ikumapayi3,4

,

Esther T Akinlabi5

,

Stephen A Akinlabi5

,

Younes Menni6,7

1 College of Engineering, Mechanical Engineering Department, King Khalid University, Abha, Saudi Arabia
2 Department of Computer Engineering, Biruni University, Istanbul, Türkiye
3 Department of Mechanical and Mechatronics Engineering, Afe Babalola University, Ado Ekiti, Nigeria
4 Department of Mechanical Engineering Science, University of Johannesburg, Johannesburg, South Africa
5 Department of Mechanical and Construction Engineering, Faculty of Engineering and Environment, Northumbria University, Newcastle, UK
6 Department of Technology, University Center Salhi Ahmed Naama (Ctr. Univ. Naama), Naama, Algeria
7 College of Engineering, National University of Science and Technology, Dhi Qar, Iraq
Enhancing flow structure in heat exchangers analysis of dynamic and thermal air-flow behavior with perforated and inclined baffles
THERMAL SCIENCE, volume 27, No. 4, YEAR 2023