THERMAL SCIENCE

International Scientific Journal

Thermal Science - Online First

Zhe Wang

,

Xiaojing Ma

,

Shenhua Hu

,

Wei Zhang

,

Jiawen Li

online first only

Numerical simulation of enhanced heat transfer in heat storage units by metal foam and fins

ABSTRACT
Phase change energy storage technology can reduce energy waste, alleviate the energy crisis, and solve the problem of volatility and instability of renewable energy in the utilization process. This paper investigated the enhancement of heat transfer of shell-and-tube heat storage unit by adding tree-shaped fractal fins and metal foam. A three-dimensional numerical model is established, six different heat storage unit tubes are compared to explore the prominent influence of tree-shaped fins and metal foams on the melting process, the thermal performance of varying heat storage unit tubes in the melting process is comprehensively evaluated. The results show that the tree-shaped fractal finned metal foam tubes can significantly enhance the heat transfer to achieve the best heat transfer effect, compared with the smooth tube in terms of the phase change material can be reduced by about 84.7% of the complete melting time; the temperature response rate was increased by 526%, the integral-average heat flux was increased by 376% and the integral-average Nusselt number was increased by 367%.
KEYWORDS
phase change material, Heat transfer reinforcement, metal foam, fins
PAPER SUBMITTED: 1970-01-01
PAPER REVISED: 2025-08-01
PAPER ACCEPTED: 2025-08-28
PUBLISHED ONLINE: 2025-11-08
DOI REFERENCE: https://doi.org/10.2298/TSCI250524186W
REFERENCES
  1. Jayathunga, D. S., et al., Phase change material (PCM) candidates for latent heat thermal energy storage (LHTES) in concentrated solar power (CSP) based thermal applications a review. Renewable and Sustainable Energy Reviews, 189(2024), pp. 113904
  2. Lee, Y. T., et al., Numerical and experimental investigations on melting heat transfer performance of PCM in finned cold thermal energy storage. International Journal of Heat and Mass Transfer, 210(2023), pp. 124199
  3. Xiao, T., et al. Melting of phase change materials inside metal foams with uniform/graded porosity: Pore scale simulation. Applied Thermal Engineering, 232(2023), pp. 121082
  4. Bharathiraja, R., et al., Thermal characteristics enhancement of Paraffin Wax Phase Change Material (PCM) for thermal storage applications. Renewable Energy, 222(2024), pp. 119986
  5. Yin, L., et al., Flow boiling heat transfer in multi stage enhanced open microchannels with micro/nano structures. Applied Thermal Engineering, 258(2025), pp. 124695
  6. Zhao, C., et al., Fin design optimization to enhance PCM melting rate inside a rectangular enclosure. Applied Energy, 321(2022), pp. 119368
  7. Hu, Z., et al., Numerical simulation of fin arrangements on the melting process of PCM in a rectangular unit. Renewable Energy, 220(2024), pp. 119677
  8. Abhinand, S., et al., Performance analysis of PCM melting in a fin assisted thermal energy storage system a numerical study. International Communications in Heat and Mass Transfer, 144(2023), pp. 106747
  9. Guo, J., et al., Melting assessment on the angled fin design for a novel latent heat thermal energy storage tube. Renewable Energy, 183(2022), pp. 406 422
  10. Ao, C., et al., Assessment on the effect of longitudinal fins upon melting process in a latent heat thermal energy storage unit. Journal of Energy Storage, 59(2023), pp. 106408
  11. Huang, Y., and Liu, X. Charging and discharging enhancement of a vertical latent heat storage unit by fractal tree shaped fins. Renewable Energy, 174(2021), pp. 199 217
  12. Ren, F., et al., Optimization on a novel irregular snowflake fin for thermal energy storage using response surface method. International Journal of Heat and Mass Transfer, 200(2023), pp. 123521
  13. Roshani, M., et al., Enhancing geothermal heat pump efficiency with fin creation and microencapsulated PCM: A numerical study. Journal of Energy Storage, 95(2024), pp. 112664
  14. Rawat, P., and Sherwani, A. F A, numerical study on the impact of fin length arrangement and material on the melting of PCM in a rectangular enclosure. International Journal of Heat and Mass Transfer, 205(2023), pp. 123932
  15. ul Hasnain, F., et al., Melting performance enhancement of a phase change material using branched fins and nanoparticles for energy storage applications. Journal of Energy Storage, 38(2021), pp. 102513
  16. Pu, L., et al., Numerical study on the performance of shell--and--tube thermal energy storage using multiple PCMs and gradient copper foam. Renewable Energy, 174(2021), pp. 573--589
  17. Wang, Z., et al., Effect of copper metal foam proportion on heat transfer enhancement in the melting process of phase change materials. Applied Thermal Engineering, 201(2022), pp. 117778
  18. Bouzidi, M., et al., Charging and discharging heat transfer improvement of shell--tube storage utilizing a partial layer of anisotropic metal foam. Journal of Energy Storage, 79(2024), pp. 109948
  19. Meng, X., et al., Effect of porosity and pore density of copper foam on thermal performance of the paraffin--copper foam composite Phase--Change Material. Case Studies in Thermal Engineering, 22(2020), pp. 100742
  20. Iasiello, M., et al., Metal foam/PCM melting evolution analysis: Orientation and morphology effects. Applied Thermal Engineering, 187(2021), pp. 116572
  21. Wang, Z., et al., Effect of enhancement in metal foam pore density on heat transfer of phase--change materials. International Communications in Heat and Mass Transfer, 144(2023), pp. 106750
  22. Mandelbrot, B. B., et al., Fractal character of fracture surfaces of metals. Nature, 308(5961) (1984), pp. 721--722
  23. Cui, H. T. Experimental investigation on the heat charging process by paraffin filled with high porosity copper foam. Applied thermal engineering, 39(2012), pp. 26--28
  24. Xu, Y., et al., Evaluation and optimization of melting performance for a latent heat thermal energy storage unit partially filled with porous media. Applied energy, 193(2017), pp. 84--95
  25. Mahdi, J. M., et al., Intensifying the thermal response of PCM via fin--assisted foam strips in the shell--and--tube heat storage system. Journal of Energy Storage, 45(2022), pp. 103733
  26. Georgiadis, J. G., and Catton, I., Dispersion in cellular thermal convection in porous layers. International journal of heat and mass transfer, 31(5) (1988), pp. 1081--1091
  27. Yang, X., et al., Solidification in a shell--and--tube thermal energy storage unit filled with longitude fins and metal foam: A numerical study. Energy and Built Environment, 4(1) (2023), pp. 64--73
  28. Zhang, P., et al., Melting heat transfer characteristics of a composite phase change material fabricated by paraffin and metal foam. Applied Energy, 185 (2017), pp. 1971--1983
PDF VERSION [DOWNLOAD]
Numerical simulation of enhanced heat transfer in heat storage units by metal foam and fins