THERMAL SCIENCE

International Scientific Journal

Xingquan Song

RESEARCH ON THE PERFORMANCE OF HEAT STORAGE DEVICES UNDER DIFFERENT MELTING POINT PHASE CHANGE MATERIALS IN INDUSTRIAL WASTE HEAT UTILIZATION

ABSTRACT
Phase change heat storage technology can provide effective solutions for temporal and spatial mismatch in the utilization of industrial waste heat and achieve efficient heat transportation. However, in view of the diverse characteristics of industrial waste heat, it is urgent to conduct research on the utilization of waste heat at different temperatures. Building upon existing theories, this paper innovatively establishes a numerical model for multi-melting-point phase change heat storage materials (PCM), taking into account both temperature of the heating surface and melting points of the heat storage materials. The melting process of the selected materials was simulated and the results were discussed. The coupled thermal performance of different heating surfaces and melting point temperatures was quantitatively clarified based on the analysis of the results of numerical models. The research results show that different heating surfaces have remarkable influence on the melting efficiency. At the melting point of 50℃, under the heating surface at 75℃, the complete melting time is only 3360 seconds, which is 31% of the complete melting time when using a heating surface at 60℃. Furthermore, when the heating surface temperature reaches a certain level, the influence brought by melting point gradually diminishes. Evolution diagrams of the temperature field visually demonstrates the positive correlation between the intensity of natural convection and the heat transfer temperature difference. Finally, it was found that latent heat mainly determines the heat storage capacity of PCM and choose materials with appropriate melting points can improve the heat storage rate. By conducting research on the new type of heat storage device with multiple heating surfaces and multiple melting points, this study provides guidance for optimizing the heat utilization efficiency in practical engineering applications.
KEYWORDS
phase change materials, Industrial waste heat utilization, Melting performance, Melting point
PAPER SUBMITTED: 2025-09-12
PAPER REVISED: 2025-09-29
PAPER ACCEPTED: 2025-10-01
PUBLISHED ONLINE: 2025-11-01
DOI REFERENCE: https://doi.org/10.2298/TSCI250912180S
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2025, VOLUME 29, ISSUE No. 6, PAGES [4513 - 4525]
REFERENCES
[1] Kaosmadakis, G. (2024) Industrial waste heat potential and heat exploitation solutions %J Applied Thermal Engineering. 246, 122957-, 10.1016/j.applthermaleng.2024.122957
[2] Montella, L., Liu, X., Monaco, R., Murino, T., & Nielsen, P. S. (2025) An integrated multi-criteria decision making framework for industrial excess heat recovery and utilization. Energy, 318, 134721, 10.1016/j.energy.2025.134721
[3] Nomura, T., Okinaka, N., & Akiyama, T. (2010) Waste heat transportation system, using phase change material (PCM) from steelworks to chemical plant. Resources, Conservation and Recycling, 54, 1000-1006, 10.1016/j.resconrec.2010.02.007
[4] Anacreonte, A. V., Vitobello, R., & Musto, M. (2025) Impact of inlet fluctuations on the stratification of a sensible thermal energy storage. Renewable Energy, 252, 123484, 10.1016/j.renene.2025.123484
[5] Ghosh, D., Ghose, J., Datta, P., aumari, P., & Paul, S. (2022) Strategies for phase change material application in latent heat thermal energy storage enhancement: Status and prospect. Journal of Energy Storage, 53, 105179, 10.1016/j.est.2022.105179
[6] Yang, X., Su, H., Liang, W., Chen, J., & Xie, J. (2025) Numerical study of Mg(OH)2/MgO thermochemical heat storage reactor coupled with parabolic dish solar system. Applied Thermal Engineering, 261, 125128, 10.1016/j.applthermaleng.2024.125128
[7] Gioanola, G., Bastida, H., Guelpa, E., Verda, V., & Sciacovelli, A. (2025) Innovative methodology for optimized design and thermo-economic analysis of pillow-plate latent heat thermal energy storage: a case study on heat recovery in the brewing industry. Energy Conversion and Management, 341, 120025, 10.1016/j.enconman.2025.120025
[8] Nyallang Nyamsi, S., Tolj, I., & Lototskyy, M. J. E. (2019) Metal hydride beds-phase change materials: Dual mode thermal energy storage for medium-high temperature industrial waste heat recovery. 12, 3949, 10.3390/en12203949
[9] Yang, S., Shao, X.-F., Luo, J.-H., Baghaei Oskouei, S., Bayer, Ö., & Fan, L.-W. (2023) A novel cascade latent heat thermal energy storage system consisting of erythritol and paraffin wax for deep recovery of medium-temperature industrial waste heat. Energy, 265, 126359, 10.1016/j.energy.2022.126359
[10] A., M. M., A., M. S., & O., M. N. (2022) Surface melting of snow-firn-ice structures and estimation of extended transient energy and mass balances using a liquid solid phase-change model %J International Communications in Heat and Mass Transfer. 136, 10.1016/j.icheatmasstransfer.2022.106175
[11] Yang, X., Xu, F., Sun, E., Chen, Q., & Xu, J. (2025) Enhanced coupling of low-grade heat sources with Carnot battery through optimal temperature matching %J Energy Conversion and Management. 339, 119953-119953, 10.1016/j.enconman.2025.119953
[12] Hu, B., Wang, H., Yang, J., Li, J., Li, C., & Ren, X. (2025) Experimental and numerical investigation on heating performance comparison of air conditioning heating systems based on water-phase change material heat storage system and water heat storage system. Energy, 331, 137005, 10.1016/j.energy.2025.137005
[13] Yan, Q., & Mu, B. (2025) Energy storage materials for phase change heat devices recovering industrial waste heat for heating purposes. International Communications in Heat and Mass Transfer, 160, 108376, 10.1016/j.icheatmasstransfer.2024.108376
[14] Marri, G. a., Srikanth, R., & Balaji, C. (2020) Effect of phase change and ambient temperatures on the thermal performance of a solid-liquid phase change material based heat sinks. Journal of Energy Storage, 30, 101327, 10.1016/j.est.2020.101327
[15] Yu, M., Zheng, X., Liu, J., Niu, D., Liu, H., & Gao, H. (2025) Numerical Simulation Study of Heat Transfer Fluid Boiling Effects on Phase Change Material in Latent Heat Thermal Energy Storage Units %J Energies. 18, 3836-3836, 10.3390/en18143836
[16] Yang, J., Yang, L., Xu, C., & Du, X. J. A. E. (2016) Experimental study on enhancement of thermal energy storage with phase-change material. 169, 164-176, 10.1016/j.apenergy.2016.02.028
[17] Zheng, Y., & Wang, Z. (2019) Study on the heat transfer characteristics of a shell-and-tube phase change energy storage heat exchanger. Energy Procedia, 158, 4402-4409, 10.1016/j.egypro.2019.01.777
[18] Mosaffa, A., Talati, F., Rosen, M., Basirat-Tabrizi, H. J. A. M., & Mechanics. (2012) Green's function solution for transient heat conduction in annular fin during solidification of phase change material. 33, 1265-1274, 10.1007/s10483-012-1620-x
[19] Sabine, M., & Robert, D. (2022) Influence of Natural Convection and Volume Change on Numerical Simulation of Phase Change Materials for Latent Heat Storage %J Energies. 15, 2746-2746, 10.3390/en15082746
[20] Oertel, H., & Böhle, M. (2001). Prandtl-Führer durch die Strömungslehre (Vol. 10): Springer, 10.1007/978-3-322-94254-8
[21] Kaheirabadi, A. C., & Groulx, D. J. C. T. S. A. I. J. (2015) Simulating phase change heat transfer using comsol and fluent: Effect of the mushy-zone constant. 7, 10.1615/computthermalscien.2016014279
PDF VERSION [DOWNLOAD]
Research on the performance of heat storage devices under different melting point phase change materials in industrial waste heat utilization

© 2026 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence