THERMAL SCIENCE

International Scientific Journal

Rouxi ChenORCID

,

Yuqin WanORCID

,

Na Si

,

Ji-Huan HeORCID

,

Frank K Ko

,

Shu-Qiang WangORCID

BUBBLE RUPTURE IN BUBBLE ELECTROSPINNING

ABSTRACT
As the distinctive properties and different applications of nanofibers, the demand of nanofibers increased sharply in recently years. Bubble electrospinning is one of the most effective and industrialized methods for nanofiber production. To optimize the set-up of bubble electrospinning and improve its mass production, the dynamic properties of un-charged and charged bubbles are studied experimentally, the growth and rupture process of a bubble are also discussed in this paper.
KEYWORDS
bubble electrospinning, bubbfil spinning, dynamic of bubble, growth and rupture of bubble, nanofiber, mass production
PAPER SUBMITTED: 2015-01-28
PAPER REVISED: 2015-05-18
PAPER ACCEPTED: 2015-05-26
PUBLISHED ONLINE: 2015-10-25
DOI REFERENCE: https://doi.org/10.2298/TSCI1504141C
CITATION EXPORT: view in browser or download as text file
THERMAL SCIENCE YEAR 2015, VOLUME 19, ISSUE No. 4, PAGES [1141 - 1149]
REFERENCES
[1] Reneker, D. H., Chun, I., Nanometre Diameter Fibres of Polymer, Produced by Electrospinning, Nanotechnology, 7 (1996), 3, pp. 216-223, 10.1088/0957-4484/7/3/009
[2] Fujihara, K., et al., An Introduction to Electrospinning and Nanofibers, World Scientific, Singapore, 2005, 10.1142/5894
[3] Wang, X., et al., Needleless Electrospinning of Uniform Nanofibers Using Spiral Coil Spinnerets, Journal of Nanomaterials, 2012 (2012), ID 785920, 10.1155/2012/785920
[4] Petrik, S., Maly, M., Production Nozzle-Less Electrospinning Nanofiber Technology, Proceedings, MRS 1240 (2009), 10.1557/PROC-1240-WW03-07
[5] Chen, R. X., et al., Bubbfil Spinning for Mass-Production of Nanofibers, Thermal Science, 18 (2014), 5, pp. 1718-1719, 10.2298/tsci1405718c
[6] Liu, Y, He, J.-H., Bubble Electrospinning for Mass Production of Nanofibers. International Journal of Nonlinear Sciences and Numerical Simulation, 8 (2007), 3, pp. 393-396, 10.1515/ijnsns.2007.8.3.393
[7] Liu, Y, et al., Bubble-Electrospinning: A Novel Method for Making Nanofibers, Proceedings, 2007 International Symposium on Nonlinear Dynamics, Pts 1-4. Vol. 96. Ed. J.-H. He; 2008: Journal of Physics Conference Series, 10.1088/1742-6596/96/1/012001
[8] He, J.-H., The Smaller, the Better: From the Spider-Spinning to Bubble-Electrospinning, Acta Physica Polonica A, 121 (2012), 1, pp. 254-256, 10.12693/aphyspola.121.254
[9] Liu, Y., et al., The Principle of Bubble Electrospinning and Its Experimental Verification, Journal of Polymer Engineering, 28 (2008), 1-2, pp. 55-65, 10.1515/polyeng.2008.28.1-2.55
[10] Yang, R. R., et al., Effect of Solution Concentration on Diameter and Morphology of PVA Nanofibres in Bubble Electrospinning Process, Materials Science and Technology, 26 (2010), 11, pp. 1313-1316, 10.1179/026708310x12798718274476
[11] Kong, H.-Y., et al., Polymer Liquid Membrane for Nanofiber Fabrication, Thermal Science, 17 (2013), 5, pp. 1479-1482, 10.2298/tsci1305479k
[12] Gule, N. P., et al., Furanone-Containing Poly (Vinyl Alcohol) Nanofibers for Cell-Adhesion Inhibition, Water Research, 47 (2013), 3, pp. 1049-1059, 10.1016/j.watres.2012.11.012
[13] Dou, H., et al., Effect of Solution Concentrations on the Morphology of Nylon6/66 Nanofibrous Yarns by Blown Bubble-Spinning, Materia, 19 (2014), 4, pp. 358-362, 10.1590/s1517-70762014000400005
[14] Chen, R.-X., et al., Mechanism of Nanofiber Crimp, Thermal Science, 17 (2013), 5, pp. 1473-1477, 10.2298/tsci1305473c
[15] Chen. R.-X., On Surface Tension of a Bubble under Presence of Electrostatic Force, Thermal Science, 19 (2015), 1, pp. 353-355, 10.2298/tsci141214149c
[16] Li, Z.-B., et al., On Air Blowing Direction in the Blown Bubble-Spinning, Materia, 19 (2014), 4, pp. 345-349, 10.1590/s1517-70762014000400003
[17] Li, Y., et al., Comparison between Electrospun and Bubbfil-Spun Polyether Sulfone Fibers, Materia, 19 (2014), 4, pp. 363-369, 10.1590/s1517-70762014000400006
[18] Shen, J., et al., Bio-Mimic Design of PM2.5 Anti-Smog Masks, Thermal Science, 18 (2014), 5, pp. 1689-1690, 10.2298/tsci1405689s
[19] Sidaravicius, J., et al., The Influence of Solution Parameters on the Electrospinning Intensity from Foamed Surface, Journal of Applied Polymer Science, 132 (2015), 23, pp. 42034-42041, 10.1002/app.42034
[20] Ren, X., et al., Foaming-Assisted Electrospinning of Large-Pore Mesoporous ZnO Nanofibers with Tailored Structures and Enhanced Photocatalytic Activity, RSC Advances, 5 (2015), 21, pp. 16361-16367, 10.1039/c4ra15421e
[21] Jiang, G., et al. An Improved Free Surface Electrospinning with Micro-Bubble Solution System for Massive Production of Nanofibers, Materials Letters, 144 (2015), 4, pp. 22-25, 10.1016/j.matlet.2014.12.139
PDF VERSION [DOWNLOAD]
BUBBLE RUPTURE IN BUBBLE ELECTROSPINNING

© 2026 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence