THERMAL SCIENCE

International Scientific Journal

Kai Luana

,

Qifei Jiana

VISUALIZATION OF CONDENSATION FRACTIONATION IN ULTRA-THIN FLAT HEAT PIPE WITH BINARY MIXED FLUID

ABSTRACT
An ultra-thin flat heat pipe with a sintered wick thickness of 0.5 mm and an overall thickness of 1.3 mm was designed. Visualization experiments were conducted to investigate the thermal performance and flow behavior of ethanol-water binary mixtures. The work aims to elucidate the condensation fractionation phenomenon and its impact on thermal resistance. The results show that binary mixtures known to exhibit excellent performance in conventional heat pipes undergo condensation fractionation in ultra-thin flat heat pipes. The different condensation points of the vapor components cause extensive condensation of water-rich vapor near the evaporation section. This fractionation intensifies with increasing heat load, leading to incomplete fluid circulation and significant heat transfer deterioration. As a result, thermal resistance remains persistently high. Furthermore, the mixture with a high ethanol mole fraction (90 mol%) is proposed as the optimal working fluid. It effectively mitigates condensation fractionation and achieves enhanced thermal performance.
KEYWORDS
Ultra-thin flat heat pipe, Binary mixed fluid, Visualization experimental study, thermal resistance, Condensation fractionation
PAPER SUBMITTED: 2026-01-21
PAPER REVISED: 2026-03-22
PAPER ACCEPTED: 2026-04-02
PUBLISHED ONLINE: 2026-06-20
DOI REFERENCE: https://doi.org/10.2298/TSCI260121070L
REFERENCES
[1] Jouhara, H., et al., Heat pipe based systems - Advances and applications, Energy, 128 (2017), Jun., pp. 729-754., 10.1016/j.energy.2017.04.028
[2] Zhou, W., et al., Ultra-thin flattened heat pipe with a novel band-shape spiral woven mesh wick for cooling smartphones, International Journal of Heat and Mass Transfer, 146 (2020), Jan., pp. 118792., 10.1016/j.ijheatmasstransfer.2019.118792
[3] Wang, H., et al., Thermal characteristic comparison of three-dimensional oscillating heat pipes with/without sintered copper particles inside flat-plate evaporator for concentrating photovoltaic cooling, Applied Thermal Engineering, 167 (2020), Feb., pp. 114815., 10.1016/j.applthermaleng.2019.114815
[4] Aref, L., et al., A novel dual-diameter closed-loop pulsating heat pipe for a flat plate solar collector, Energy, 230 (2021), Sep., pp. 120751., 10.1016/j.energy.2021.120751
[5] Huq, T., et al., Review on aqueous graphene nanoplatelet Nanofluids: Preparation, Stability, thermophysical Properties, and applications in heat exchangers and solar thermal collectors, Applied Thermal Engineering, 210 (2022), Jun., pp. 118342., 10.1016/j.applthermaleng.2022.118342
[6] He, B., et al., Experimental study on heat transfer performance of micro-grooved I-shaped aluminum heat pipe for heat pipe heat exchangers, Applied Thermal Engineering, 253 (2024), Sep., pp. 123773., 10.1016/j.applthermaleng.2024.123773
[7] Sethuraman, R., et al., Comparative analysis of thermal performance in heat pipe heat exchangers employing two distinct convective heat transfer media, Journal of Thermal Analysis and Calorimetry, 149 (2024), Mar, pp. 4069-4085., 10.1007/s10973-024-12944-9
[8] Kang, S., et al., Empirical modeling and experimental validation of gas-to-liquid heat pipe heat exchanger with baffles, Energy, 303 (2024), Sep., pp. 131972., 10.1016/j.energy.2024.131972
[9] Zhou, Z., et al., Performance evaluation of hybrid oscillating heat pipe with carbon nanotube nanofluids for electric vehicle battery cooling, Applied Thermal Engineering, 196 (2021), Sep. pp. 117300., 10.1016/j.applthermaleng.2021.117300
[10] Ahamed, M. S., et al., Characterization of a high performance ultra-thin heat pipe cooling module for mobile hand held electronic devices, Heat and Mass Transfer, 53 (2017), Mar, pp. 3241-3247., 10.1007/s00231-017-2022-7
[11] Rathod, J., et al., Experimental study on the effect of graphene and Al2O3 nanofluids in a miniature flat heat pipe, Thermal Science and Engineering Progress, 42 (2023), Jul., pp. 101905., 10.1016/j.tsep.2023.101905
[12] He, B., et al., Visualization investigation on heat and mass transfer of Al2O3 nanofluid in vapor chamber, Applied Thermal Engineering, 256 (2024), Nov., pp. 124098., 10.1016/j.applthermaleng.2024.124098
[13] Gupta, N. K., et al., Heat transfer mechanisms in heat pipes using nanofluids - A review, Experimental Thermal and Fluid Science, 90 (2018), Jan., pp. 84-100., 10.1016/j.expthermflusci.2017.08.013
[14] Senthilkumar, R., et al., Comparative study on heat pipe performance using aqueous solutions of alcohols, Heat and Mass Transfer, 48 (2012), Nov., pp. 2033-2040., 10.1007/s00231-012-1046-2
[15] Savino, R., et al., Heat pipes with binary mixtures and inverse Marangoni effects for microgravity applications, Acta Astronautica, 61 (2007), 1-6., pp. 16-26., 10.1016/j.actaastro.2007.01.002
[16] Di Francescantonio, N., et al., New alcohol solutions for heat pipes: Marangoni effect and heat transfer enhancement, International Journal of Heat and Mass Transfer, 51 (2008), 25-26., pp. 6199-6207., 10.1016/j.ijheatmasstransfer.2008.01.040
[17] Czajkowski, C., et al., Experimental study on a large scale pulsating heat pipe operating at high heat loads, different adiabatic lengths and various filling ratios of acetone, ethanol, and water, Applied Thermal Engineering, 165 (2020), Jan., pp. 114534., 10.1016/j.applthermaleng.2019.114534
[18] Su, Q., et al., An experimental study on the heat transfer performance of a loop heat pipe system with ethanol-water mixture as working fluid for aircraft anti-icing, International Journal of Heat and Mass Transfer, 139 (2019), Aug., pp. 280-292., 10.1016/j.ijheatmasstransfer.2019.05.015
[19] Malla, L. K., et al., Thermal and flow characteristics in a flat plate pulsating heat pipe with ethanol-water mixtures: From slug-plug to droplet oscillations, International Journal of Heat and Mass Transfer, 194 (2022), Sep., pp. 123066., 10.1016/j.ijheatmasstransfer.2022.123066
[20] Jouhara, H., et al., Experimental investigation of an inclined-condenser wickless heat pipe charged with water and an ethanol-water azeotropic mixture, Energy, 61 (2013), Nov., pp. 139- 147., 10.1016/j.energy.2012.09.033
[21] Xu, Y., et al., Experimental study on heat transfer performance of pulsating heat pipes with hybrid working fluids, International Journal of Heat and Mass Transfer, 157 (2020), Aug., pp. 119727.  Paper, 10.1016/j.ijheatmasstransfer.2020.119727
PDF VERSION [DOWNLOAD]
Visualization of condensation fractionation in ultra-thin flat heat pipe with binary mixed fluid

© 2026 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution 4.0 International licence