- home
- about
- founder & publisher
- editorial boards
- advisory board
- for authors
- call for papers
- archive
- online first
- editorial policy
- participation fee
- contacts
THERMAL SCIENCE
International Scientific Journal
Find this paper on
NUMERICAL INVESTIGATION OF HEAT TRANSFER PERFORMANCE IN PARALLEL AND SYMMETRIC WAVY MICROCHANNEL HEAT SINKS
ABSTRACT
Micro-channel heat sinks have advantages such as a high surface area-to-volume ratio, a large heat transfer coefficient, and lightweight design, making them crucial for microelectronics and aerospace applications. Numerical simulation was conducted to analyze the fluid-flow and heat transfer characteristics in the newly designed heat sink at Reynolds number ranging from 147-736. The symmetric wavy micro-channel heat sinks were compared with the parallel wavy micro-channel heat sinks based on friction coefficient, Nusselt number, and comprehensive performance factor. The results indicate that periodic variation in the cross-sectional area of the symmetric wavy micro-channels generates vortices at the valleys, enhancing fluid mixing. In contrast, the fluid in the parallel wavy micro-channels exhibits a wave-type flow pattern, where the wavy structure disrupts the flow boundary-layer. The fluid-flows along the streamlined boundary with less flow friction. This enables heat transfer enhancement under lower pressure drop conditions. The geometrical parameters for optimal heat transfer performance are obtained by adjusting the amplitude ratio, α. The comprehensive performance factor for the parallel wavy micro-channels, with a Reynolds number of 736 and a value of α = 4, is 1.64.
KEYWORDS
PAPER SUBMITTED: 2024-12-06
PAPER REVISED: 2025-06-11
PAPER ACCEPTED: 2025-06-28
PUBLISHED ONLINE: 2025-08-02
DOI REFERENCE: https://doi.org/10.2298/TSCI241206134D
CITATION EXPORT: view in browser or download as text file
REFERENCES
[1] Tuckerman, D. B., Pease, R. F.W., High-Performance Heat Sinking for VLSI, IEEE Electron Device Letters, 2 (1981), 5, pp. 126-129, 10.1109/edl.1981.25367
[2] Wang, X. D., et al., Optimal Geometric Structure for Nanofluid-Cooled Micro-Channel Heat Sink under Various Constraint Conditions, Energy Conversion and Management, 65 (2013), Jan., pp. 528-538, 10.1016/j.enconman.2012.08.018
[3] Leng, C., et al., An Improved Design of Double-Layered Micro-channel Heat Sink with Truncated Top Channels, Applied Thermal Engineering, 79 (2015), Mar., pp. 54-62, 10.1016/j.applthermaleng.2015.01.015
[4] Shang, X. S., et al., Mathematical Modelling and Multi-Objective Optimization on the Rectangular Micro-Channel Heat Sink, International Journal of Thermal Sciences, 184 (2023), 107926, 10.1016/j.ijthermalsci.2022.107926
[5] Kumar, K., Kumar, P., Effect of Groove Depth on Hydrothermal Characteristics of the Rectangular Micro-Channel Heat Sink, International Journal of Thermal Sciences, 161 (2021), 106730, 10.1016/j.ijthermalsci.2020.106730
[6] Zhu, Q. F., et al., Local Hydrothermal Characteristics and Temperature Uniformity Improvement of Micro-Channel Heat Sink with Non-Uniformly Distributed Grooves, Case Studies in Thermal Engineering, 47 (2023), 103113, 10.1016/j.csite.2023.103113
[7] Soo, Y., H., et al., Heat Transfer Enhancement of Staggered Water-Droplet Grooved Micro-Channel Heat Sink Using Al2O3 Nanofluid, Thermal Science, 28 (2024), 3B, pp. 2477-2490, 10.2298/tsci230706009s
[8] Bhandari, P., et al. Design Modifications in Micro Pin Fin Configuration of Micro-Channel Heat Sink for Single Phase Liquid-Flow: A Review, Journal of Energy Storage, 66 (2023), 107548, 10.1016/j.est.2023.107548
[9] Bhandari, P., Prajapati., Y. K., Influences of Tip Clearance on Flow and Heat Transfer Characterstics of Open type Micro Pin Fin Heat Sink, International Journal of Thermal Sciences, 179 (2022), 107714, 10.1016/j.ijthermalsci.2022.107714
[10] Bhandari, P., Prajapati, Y. K., Thermal Performance of Open Micro-Channel Heat Sink with Variable Pin Fin Height, International Journal of Thermal Sciences, 159 (2021), 106609, 10.1016/j.ijthermalsci.2020.106609
[11] Wang, R. J., et al., Parameterization Investigation on the Micro-Channel Heat Sink with Slant Rectangular Ribs by Numerical Simulation, Applied Thermal Engineering, 133 (2018), Mar., pp. 428-438, 10.1016/j.applthermaleng.2018.01.021
[12] Khoshvaght-Aliabadi, M., et al., Performance Enhancement of Straight and Wavy Miniature Heat Sinks Using Pin-Fin Interruptions and Nanofluids, Chemical Engineering and Processing: Process Intensification, 122 (2017), Dec., pp. 90-108, 10.1016/j.cep.2017.10.002
[13] Venkiteswaran, V. K., et al., Comparative Study of Heat and Fluid-Flow Characteristics of Parallel and Offset Strip Fin Micro-Channels Using CFD Simulations, Thermal Science, 22 (2018), 5, pp. 1973-1985, 10.2298/tsci171226264v
[14] Li, H., et al., Optimal Design of Micro-Channel Heat Sink with Staggered Fan-Shaped Cavities and Ribs, Journal of Thermophysics and Heat Transfer, 38 (2024), 2, pp. 145-158, 10.2514/1.t6866
[15] Wang, C. L., et al., Enhanced Heat Transfer Study of Micro-Channel Heat Sink with Periodically Arranged Triangular Cavities and Arc‐Shaped Ribs, Heat Transfer, 53 (2024), 5, pp. 2438-2459, 10.1002/htj.23042
[16] Datta, A., et al., A Conjugate Heat Transfer Analysis of Performance for Rectangular Micro-Channel with Trapezoidal Cavities and Ribs, International Journal of Thermal Sciences, 138 (2019), Apr., pp. 425-446, 10.1016/j.ijthermalsci.2018.12.020
[17] Zhu, Q. F., et al., Numerical Simulation Study of Thermal and Hydraulic Characteristics of Laminar Flow in Micro-channel Heat Sink with Water Droplet Cavities and Different Rib Columns, International Journal of Thermal Sciences, 172 (2022), 107319, 10.1016/j.ijthermalsci.2021.107319
[18] Jiang, M. X., Pan, Z. L., Optimization of Micro-Channel Heat Sink Based on Genetic Algorithm and Back Propagation Neural Network, Thermal Science, 27 (2023), 1A, pp. 179-193, 10.2298/tsci220307121j
[19] Sui, Y., et al., Fluid-Flow and Heat Transfer in Wavy Micro-Channels, International Journal of Heat and Mass Transfer, 53 (2010), 13-14, pp. 2760-2772
[20] Sui, Y., et al., Direct Numerical Simulation of Fluid-flow and Heat Transfer in Periodic Wavy Channels with Rectangular Cross-Sections, International Journal of Heat and Mass Transfer, 55 (2012), 1-3, pp. 73-88, 10.1016/j.ijheatmasstransfer.2011.08.041
[21] Sui, Y., et al., An Experimental Study of Flow Friction and Heat Transfer in Wavy Micro-Channels with Rectangular Cross-Section, International Journal of Thermal Sciences, 50 (2011), 12, pp. 2473-2482, 10.1016/j.ijheatmasstransfer.2010.02.022
[22] Xie, G. N., et al., Constructal Theory Based Geometric Optimization of Wavy Channels in the Low Reynolds Number Regime, Journal of Electronic Packaging, 136 (2014), 3, 031013, 10.1115/1.4027728
[23] Zhou, J. D., et al., Design of Micro-Channel Heat Sink with Wavy Channel and Its Time-Efficient Optimization with Combined RSM and FVM Methods, International Journal of Heat and Mass Transfer, 103 (2016), Dec., pp. 715-724, 10.1016/j.ijheatmasstransfer.2016.07.100
[24] Ali, A. Y. M., et al., Thermal Analysis of High Concentrator Photovoltaic Module Using Convergent-Divergent Micro-Channel Heat Sink Design, Applied Thermal Engineering, 183 (2021), 116201, 10.1016/j.applthermaleng.2020.116201
[25] Wang, X. W., et al., Study on the Flow and Heat Transfer Characteristics of Sinusoidal Half-Corrugated Micro-Channels, Journal of Thermophysics and Heat Transfer, 34 (2020), 2, pp. 314-321, 10.2514/1.t5801
[26] Fang, Y. Q., et al., Numerical Study on Heat and Flow Transfer Characteristics in Rectangular Mini-Channel with S-Shaped Turbulator Inserted, Thermal Science, 27 (2023), 4A, pp. 2865-2877, 10.2298/tsci220919210f
[27] Steinke, M. E., Kandlikar, S. G., Single-Phase Liquid Friction Factors in Micro-Channels, International Journal of Thermal Sciences, 45 (2006), 11, pp. 1073-1083, 10.1016/j.ijthermalsci.2006.01.016
[28] Phillips, R. J., Micro-Channel Heat Sinks, The Lincoln Laboratory Journal, 1 (1988), 1, pp. 31-48
[29] Liu, W., et al., Physical Quantity Synergy in Laminar Flow Field and Its Application in Heat Transfer Enhancement, International Journal of Heat and Mass Transfer, 52 (2009), 19-20, pp. 4669-4672, 10.1016/j.ijheatmasstransfer.2009.02.018
[30] Bhandari, P., et al., A Review on Design Alteration in Micro-Channel Heat Sink for Augmented ThermoHydraulic Performance, Ain Shams Engineering Journal, 15 (2024), 2, 102417, 10.1016/j.asej.2023.102417
© 2026 Society of Thermal Engineers of Serbia. Published by the Vinča Institute of Nuclear Sciences, National Institute of the Republic of Serbia, Belgrade, Serbia. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution-NonCommercial-NoDerivs 4.0 International licence